WYCO SELECT-CYCLE - W416-056
The Wyco SELECT-Cycle allows users to select from three vibrating speeds; 8,000, 10,800 and 12,000 vpm’s with a simple switch selection. By connecting between the generator and vibrator, the select cycle adapts any 230 volt or other single phase source to three phase 230 volt.
What our Experts Think
-
Flexible Speed Selection for Concrete Consolidation – The WYCO SELECT‑CYCLE – W416‑056 lets users choose between multiple vibrator speeds (8,000, 10,800 & 12,000 vpm) via a simple switch, so you can optimize vibration based on slump and mix conditions.
-
Adapts Single‑Phase Power to 3‑Phase – This converter connects between a 230 V generator or single‑phase power source and your vibrator, adapting it into reliable 230 V, 3‑phase output to run high‑cycle vibrators smoothly.
-
Runs Two Vibrators at Once – Designed to power up to two WYCO high‑cycle vibrators, helping speed up consolidation on larger pours while maintaining consistent speed.
-
Built for Jobsite Durability – Rugged construction with a protective frame keeps the unit safe from jobsite abuse, and the internal design helps minimize motor surges and wear.
-
Simplified Setup & Control – Straightforward hookup and a selectable speed switch make it easy to adjust vibration performance without complex controls.
-
Expert Verdict – A practical and durable speed converter for contractors who want to tailor vibrator output for different concrete conditions while powering one or two high‑cycle heads with stable, three‑phase performance.
Q&A
Q: What is the WYCO SELECT‑CYCLE (W416‑056)?
A: It’s a select cycle converter box that lets concrete workers choose between 3 vibration speeds (8,000, 10,800, or 12,000 vpm) and adapt a 230 V single‑phase power source to 230 V three‑phase for use with electric concrete vibrators.
Q: Why would I need this converter?
A: It enables you to match vibration speed to concrete slump and job needs, ensuring better consolidation and reducing voids in the pour — especially on large or performance‑mix jobs.
Q: What vibrators can it power?
A: Designed to run up to two Wyco High‑Cycle concrete vibrators while maintaining consistent speed under load.
Q: Does it protect equipment?
A: Yes — rugged construction with surge protection and durable frame helps safeguard the converter and connected vibrators on demanding job sites.
Q: How is it used with generators or site power?
A: Connect the SELECT‑CYCLE between a 230 V single‑phase generator or power source and your vibrator(s), and use the switch to select the desired vibration speed.
Q: Who benefits from this tool?
A: Concrete contractors and finishers who need flexible, consistent vibrator performance across different mixes, job conditions, and forms will benefit most from using this converter.
Maintenance Tips
-
Keep It Clean: Wipe off dust, concrete residue, and debris from the exterior and switch area after each use to prevent buildup that can affect electrical components.
-
Inspect Cables & Connections: Regularly check power cords, plugs, and connectors for cuts, frays, or loose fittings; replace damaged parts to avoid electrical issues.
-
**Check Switch Function:**Operate the speed selector switch periodically to ensure reliable selection between 8,000, 10,800, and 12,000 VPM settings.
-
Protect from Moisture: Keep the unit dry and stored in a clean, indoor environment to prevent corrosion and electrical shorting.
-
Tighten Hardware: Verify protective frame bolts and mounting hardware remain secure to minimize vibration damage during transport and use.
-
Disconnect Power Before Service: Always unplug before inspecting, cleaning, or tightening components for safety.
Damage 
Loss 
Theft 
![Chery Industrial [BARGAIN] 20ft Farm Metal Driveway Gate with Diagonal Tubes - A_IF000054](http://backyardprovider.com/cdn/shop/files/farmgatewith_31.png?v=1775546952)
![Chery Industrial [BARGAIN] 7' Garage Storage Cabinets with 20 Drawers - A_WW000208](http://backyardprovider.com/cdn/shop/files/bargain-7-ft-work-bench-with-20-drawers_30.png?v=1775546940)
