Greenlee Versi-Tugger Handheld 1,000 lb Puller - G1

• Compact handheld cable pulling solution (Greenlee G1 Versi-Tugger) designed for fast, efficient small-to-medium wire pulls in conduit systems
• Delivers up to 1,000 lb peak pulling force, making it ideal for light commercial and service work rather than heavy industrial tugging
• Cordless drill–powered operation works with most 18V–20V drills, eliminating the need for dedicated motors or bulky pulling rigs
• Capstan-based pulling system helps increase speed vs manual pulling while reducing hand strain and improving consistency
• Universal pulling head compatibility (1/2"–4" conduit) supports a wide range of everyday electrical installations
• Adjustable boom design improves setup flexibility on different jobsite layouts and conduit runs
• Portable and lightweight build makes it easy to deploy for service calls, retrofit work, and tight-access installations
• Best suited for electricians handling smaller cable pulls, data lines, branch circuits, and short conduit runs where full-size tuggers are unnecessary

Q: What is the Greenlee G1 Versi-Tugger used for?
A: It is a handheld cable pulling assist tool designed to speed up pulling electrical wire and rope through conduit (1/2" to 4") using a cordless drill.

Q: What is its pulling capacity?
A: It provides up to 1,000 lb peak pulling force, with a constant working pull force around 600 lb depending on setup and conditions.

Q: What cable sizes can it handle?
A: It is typically used for #14 AWG up to 1/0 cable, depending on conduit conditions and pulling method.

Q: What makes the Versi-Tugger different from a full cable puller?
A: Unlike large tuggers, it is a portable drill-powered assist system that mounts on conduit and helps feed line faster without a full pulling machine setup.

Q: What power source does it use?
A: It runs using a standard 18V–20V cordless drill, making it fully portable and jobsite-ready.

Q: What conduit sizes is it compatible with?
A: It is designed to work with conduit systems from 1/2" up to 4" diameter.

Q: What are its key features?
A: Key features include a universal pulling head, adjustable boom, quick setup design, and tapered capstan system for fast line release without reversing the drill.

Q: What is the main benefit on job sites?
A: It helps crews pull wire faster, reduce manual pulling effort, and improve efficiency on medium cable runs.

Q: What does “handheld tugger” mean here?
A: It means the tool is portable and drill-driven rather than a fixed hydraulic or electric cable pulling machine.

Q: Is it suitable for large feeder pulls?
A: Not typically. It is best for branch circuits and medium pulls, not heavy industrial feeder runs or high-tension long-distance pulls.

• Inspect pulling line daily: Check rope/cable for fraying, kinks, or glazing and replace if any damage is found.
• Clean capstan drum: Remove dirt, lubricant buildup, and cable residue to maintain proper grip and pulling efficiency.
• Check motor & gearbox: Listen for unusual noise, vibration, or overheating during operation.
• Lubricate moving parts: Apply light grease to bearings and drive components as recommended by manufacturer.
• Inspect control trigger/switch: Ensure smooth operation and proper response before each use.
• Verify load limit: Do not exceed 1,000 lb rated pulling capacity to prevent motor strain or damage.
• Check alignment: Ensure cable path and sheaves are aligned to reduce friction and uneven wear.
• Tighten fasteners: Regularly inspect housing screws and mounting points for loosening due to vibration.
• Inspect electrical components: Check cord, plug, and connectors for wear, cuts, or overheating signs.
• Store properly: Keep in a dry, clean environment to prevent corrosion and extend service life.