Hooke Road Rock Crawler Stubby Front Bumper w/LED Spotlight Bar(18-25 Jeep Wrangler JL & 20-25 Gladiator JT) - 31HE.30

Hooke Road Rock Crawler Stubby Front Bumper w/LED Spotlight Bar(18-25 Jeep Wrangler JL & 20-25 Gladiator JT) - 31HE.30

Perfect For Off-Road Use. This Jeep JL Front Bumper was designed with the off-road enthusiast in mind. From the raised corners for those steeper climbs and declines to welded inside and out D-Rings, these are a must-have for your Wrangler JL or Gladiator JT. With a low-profile grille guard hoop, this Gladiator JT Stubby Front Bumper features a winch plate that is capable of supporting a 12,000 lb. winch. You'll enjoy easy recovery operations and rugged protection with this great product. The Stubby Front Bumper w/LED Spotlight Bar offers off-road performance and extreme durability in one rugged package.

Heavy Duty Construction. Made from CNC laser cut 1/8" steel with fully welded seams this Jeep JL Front Bumper will take whatever stands in your way on the trails. After construction, this Stubby Front Bumper is hit with classic textured black powder coat to prevent corrosion from the outdoor climates.

E-Coating Process. E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the-art performance and decorative effects. The product percent of pass reaches 100% after the salt spray test.

Direct Bolt-on Installation. The Rock Crawler Stubby Front Bumper is a direct bolt-on replacement reusing the factory mounting points. There is no cutting or modifications required for a straightforward install. Firstly, remove the factory bumper and place the winch plate onto the frame. Then assembly the other components to be a front bumper. At last, install the bumper onto the frame with supplied bolts and adjust the position. Installation can be completed in about two hours with just basic hand tools.

SEMA Membership. Our Brand has been certified as a member of SEMA. We are studious and gradually grow up to be a professional aftermarket retailer. As a SEMA member, we make, buy, sell, and use all kinds of specialty parts and accessories to make vehicles more attractive, unique, convenient, faster, safer, more fun, and even like-new again. Wish you have a terrific off-road experience with our products.

Feature

• Weight: About 90 lbs
• Exciting Off-Road Styling. Greater Approach Angle. Offers Protection at Most Angles, While Completing the Angles and Curves Of the Vehicle
• Equipped with a License Plate Mounting Bracket & a Winch Plate, Rated Up to 12,000 lbs
• Comes with a High-Power 100W LED Spotlight Bar(21.3 Inch) & 2×18w Cube LED Spotlights
• High Strength D-Ring Mounts Welded both Inside and Out with 4.75-ton Capacity. 9500 lbs Rated, 3/4'' D-Rings Included
• Not Compatible with Factory Sensors
• Heavy-Duty, High Tensile 11-Gauge(1/8 Inch) Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) for the Winch Plate
• Textured Black Powder Coat Finish 
• Simple Bolt-On Installation. No Drill Required

What Our Experts Think

• Aggressive rock crawler stubby front bumper built for 2018–2025 Jeep Wrangler JL and 2020–2025 Gladiator JT.

• Integrated LED spotlight bar enhances visibility during off-road adventures.

• Compact stubby design improves approach angles and trail clearance.

• Constructed from heavy-duty steel with a textured black powder-coated finish for maximum durability.

• Includes D-ring mounts and winch plate for recovery readiness.

• Direct bolt-on installation — no drilling or cutting required.

Q&A

• Q: Will this bumper fit my 2023 Jeep Gladiator Rubicon?
  A: Yes, it’s compatible with all 2020–2025 Gladiator JT and 2018–2025 Wrangler JL trims.

• Q: Are the LED lights included?
  A: Yes, the LED spotlight bar comes pre-installed and ready to wire.

• Q: Can I install a winch on this bumper?
  A: Yes, it includes a built-in winch plate supporting most standard winches.

Maintenance Tips

1. Clean with mild soap and water to remove mud and debris.

2. Check all mounting bolts and D-ring hardware after off-road use.

3. Apply rust-resistant paint to any exposed metal to prevent corrosion.

4. Inspect LED wiring connections regularly for optimal light performance.