KAKA INDUSTRIAL Dual Miter Metal Bandsaw - 12 inch x 6inch, 60° Right/45° Left Swivel, Dual-Speed Motor, Hydraulic Feed, 230V 3-Phase | Ideal for Structural Steel, Pipes, Fabrication BS-126G - 188122V230B
-
Non-Symmetric Miter for Heavy Profiles-60° right/45° left swivel head cuts H-beam flanges without repositioning. Laser-etched angle scale locks positions in 3 seconds, eliminating manual measurement errors on 12.4"x6.7" steel plates
-
3-Phase Power for Industrial Stability-230V 3-phase motor maintains constant torque under 9" round bar cutting. Gear drive reduces vibration by 40% vs. belt systems (tested per ISO 10816-3)
-
Dual-Speed Adaptive Cutting-48 MPM for alloy steel, 96 MPM for aluminum—intelligent speed matching prevents blade overheating. Integrated cooling system maintains blade temp ≤140°C during continuous operation.
-
Hydraulic Safety & Auto Shutoff-Oil-dampened feed controls blade descent speed (3X slower than free-fall). EU-certified auto power cutoff when guard opens (EN ISO 13850 compliant).
-
Structural Steel Specialist-Reinforced vise clamps 12.4" I-beams without slippage (8,500 PSI clamping force). Compact 64x35 inch footprint fits steel fab shops and bridge repair sites.
Features
- Safety is a priority with the BS-126G. Key safety features include:
- Interlocking Guard: Covers the upper blade area for operator protection.
- Adjustable Lower Guards: Shield operators from ejected shavings and coolant.
- Coolant System: Prevents blade overheating for smooth, continuous operation.
- Automatic Shut-Off: Stops the blade automatically when the task is complete.
- Emergency Stop Button: Located on the front panel for immediate operation halt.
What Our Experts Think
-
The KAKA Industrial BS-126G Dual Miter Metal Bandsaw (188122V230B) is a 12" x 6" heavy-duty bandsaw designed for precision cutting of structural steel, pipes, and metal profiles.
-
Features a dual miter capability with 60° right and 45° left swivel, enabling versatile angled cuts.
-
Equipped with a dual-speed motor and hydraulic feed, providing smooth, controlled cutting and increased efficiency.
-
Runs on 230V, 3-phase power, suitable for industrial fabrication workshops.
Q&A
Q: What is the maximum cutting capacity?
A: It can cut 12" wide and 6" tall material, including steel beams, pipes, and profiles.
Q: Can it make angled cuts?
A: Yes, it supports 60° right and 45° left miter cuts for complex fabrication work.
Q: What type of feed does it use?
A: Features a hydraulic feed system for smooth, controlled material advancement.
Q: What motor does it use?
A: Powered by a dual-speed motor running on 230V, 3-phase electricity for industrial performance.
Maintenance Tips
-
Clean blade guides and cutting surfaces after each use to prevent buildup.
-
Check blade tension and alignment regularly for precise cuts.
-
Lubricate hydraulic system and pivot points periodically for smooth operation.
-
Inspect electrical components and motor to ensure safe, consistent performance.
