Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger
Features
- Specifically designed for environments with hostile atmospheric conditions, such as chemicals, high humidity or negative pressure
- Combustion air is brought in from outside the heated area - either from outdoor air or from an adjacent room - eliminating the need to use contaminated indoor air for combustion
- In-shot burners fire each heat exchanger tube for reliable performance, ease of service and decreased noise on ignition
- Same-size vent and combustion air inlets throughout product line makes installation easier
- Longer allowable vent lengths (up to 50′ vs 30′) versus previous line, providing greater installation options
- Round vent pipe and combustion air inlet pipe connection
- Automatic reset vent pressure switch is designed to prevent operation of the main burner in the event there is restricted venting of the flue
- Integrated direct spark control board provides digital control of the air mover, inducer, ignition, gas valve and flame sense
- Control Step Down Transformer used to step down from 115v to 24v for the gas controls, fan delay relay, field supplied motor start and more
- Remote flame sensor verifies ignition of all burners, monitors the flame single and communicates with the integrated circuit board
- High limit control switch is mounted in the air stream and will shut off the gas supply in the event of overheating
- 4" vent & combustion air connection
- Liquid Propane
- 200,000 BTU
- Direct spark ignition
- Single stage - on/off operation
- Aluminized steel heat exchanger
Specifications
| Fuel Type |
Propane |
| Control Type |
Electronic/IPI |
| Color/Finish |
Gray |
| Size |
42.53"W x 25.81"T x 32.83"D |
What Our Experts Think
-
High Heating Power: 200,000 BTUs effectively warm large commercial and industrial spaces.
-
Direct Spark Ignition: Provides fast, reliable startups with minimal energy waste.
-
Propane-Powered (LP): Ideal for areas without natural gas, offering a cost-effective heating solution.
-
Separated Combustion: Safely draws air from outside to maintain clean and safe indoor air quality.
-
Aluminized Steel Heat Exchanger: Corrosion-resistant and durable for long-lasting performance.
-
Single-Stage Operation: Delivers consistent, steady heat with simple controls for ease of use
Q&A
Q: What is separated combustion, and why is it important?
A: Separated combustion draws air from outside for burning fuel, keeping indoor air quality unaffected. It is essential for closed or poorly ventilated spaces, providing safer operation.
Q: What type of ignition does it use?
A: It uses direct spark ignition (DSI), eliminating the need for a standing pilot light and providing more energy-efficient and reliable operation.
Q: What size area can this heater heat?
A: This model is capable of heating larger commercial spaces up to 5,000 sq. ft., depending on insulation and layout.
Q: Is this heater energy-efficient?
A: Yes, the Modine Commercial Workspace Heater is designed to maximize the use of liquid propane while delivering reliable and efficient heating.
Maintenance Tips
-
Clean Burners Regularly – Remove any dust or debris to ensure proper combustion and reliable ignition.
-
Inspect Gas Lines & Connections – Check for leaks and ensure all fittings are tightly secured for safe operation.
-
Clear Air Intake & Exhaust Vents – Ensure vents are free of blockages to maintain proper airflow and prevent overheating.
-
Maintain Aluminized Steel Heat Exchanger – Periodically clean the heat exchanger to ensure optimal heat transfer and extend the unit’s lifespan.
-
Inspect Separated Combustion System – Ensure air intake and exhaust vents are properly sealed and free of obstructions.
-
Test Direct Spark Ignition – Regularly check ignition functionality to ensure smooth and reliable startup.
-
Monitor Thermostat Accuracy – Confirm thermostat calibration to maintain consistent and efficient temperature control.
-
Annual Professional Inspection – Schedule a yearly checkup to ensure safety, efficiency, and optimal performance.
