Apollolift 4-wheel Electric Forklift, Lithium - A-4020

What our Experts Think

• High load capacity: Rated up to 5,500 lbs, suitable for demanding warehouse, manufacturing, and distribution center operations.
• Very high lift height: Reaches up to 189 inches (≈15.7 ft), enabling efficient multi-level racking and vertical storage optimization.
• 4-wheel stability design: Provides strong balance and control, especially when handling heavy loads at full height in structured warehouse environments.
• Lithium-ion power system: Equipped with a 48V / 400Ah lithium battery, offering longer runtime, faster charging, and reduced maintenance compared to traditional lead-acid systems.
• Forklift-grade control system: Includes hydraulic steering, ergonomic operator controls, and side-shifting forks for precise pallet positioning.
• Heavy-duty industrial build: Steel frame construction with solid cushion tires designed for durability in continuous warehouse and logistics cycles.
• High-efficiency warehouse performance: Optimized for fast lifting and travel speeds, supporting high-throughput operations in busy facilities.
• Best use case: Ideal for large warehouses, logistics hubs, cold storage (with option variants), and manufacturing plants needing forklift-level reach with electric efficiency

Q&A

Q: What is its load capacity?
A: It has a rated capacity of 5,500 lbs (2,500 kg), suitable for medium-to-heavy industrial operations.

Q: What is the maximum lifting height?
A: It can lift up to 189 inches (about 15.7 ft) for high-rack warehouse storage.

Q: What type of battery does it use?
A: It uses a 48V lithium industrial battery system (around 400Ah) with fast-charging capability for long-duty cycles.

Q: Is it suitable for tight warehouse aisles?
A: It requires a recommended aisle width of about 153.5 inches, meaning it is best suited for medium-to-large warehouse layouts rather than very narrow aisles.

Q: What are its key advantages?
A: It offers high lifting height, strong load capacity, stable 4-wheel balance, and low-emission lithium power, making it a cost-efficient alternative to internal combustion forklifts for indoor use.

Q: What makes it different from smaller Apollolift equipment?
A: Unlike pallet trucks or stackers, the A-4020 is a full-sized seated forklift, designed for high throughput operations, heavier loads, and higher stacking heights in demanding warehouse environments.

Maintenance Tips

• Lithium battery care (48V system): Charge after use, avoid deep discharge, and use only the approved high-voltage charger to protect the BMS and cells.
• Daily pre-check: Inspect forks, mast, hydraulic lines, tires, and chassis for cracks, leaks, or looseness before operation.
• Hydraulic system: Ensure smooth lift/lower function; check oil level and watch for drift, slow response, or leakage.
• Mast & tilt system: Keep rails clean and lubricated; inspect chain tension and mast alignment for safe high-lift operation (up to 189").
• Electrical system: Check controller, wiring harness, connectors, and dashboard for heat damage or loose terminals.
• Drive & steering system: Test smooth acceleration, braking, and steering response; address abnormal noise immediately.
• Tires & stability: Inspect solid cushion tires for wear or flat spots to maintain stability under 5,500 lb loads.
• Load safety: Never exceed rated capacity (5,500 lb) and keep loads centered for stability at height.
• Cleaning routine: Wipe down after use; avoid water exposure to electrical components and charging ports.
• Storage: Store indoors in a dry, temperature-stable area and switch off power when idle.
• Preventive servicing: Schedule regular checks for brakes, hydraulic seals, mast wear, and battery health diagnostics.