Micro Matic USA Pro-Line Back Bar Coolers - MDD58S-E
Pro-Line™ E-Series™ Draft Beer Cooler, two-section, 59-1/2"W, self-contained refrigeration, digital thermostat, 23.7 cu. ft. capacity, integral glass rinser, (2) 3" diameter polished stainless steel draft towers (3 faucets, NSF-approved, faucet knobs not included), (2) solid hinged doors with lock, drip tray with removable grill, automatic condensate evaporator, stainless steel top, interior, & exterior, R134a, 1/3 HP, 115v/60/1-ph, 6.5 amps, NEMA 5-15P, cETLus, ETL-Sanitation (tapping equipment sold separately)
Specifications
| Manufacturer |
Micro Matic USA |
| Brand Name |
Pro-Line |
| Height |
37.25 in |
| Width |
59.5 in |
| Depth |
28.25 in |
| Shipping Weight |
318.0 lbs |
| Column Qty |
2 columns / towers |
| Exterior Finish |
All stainless steel exterior |
| Top Style |
Flat top |
| Width |
48" - 59" |
| Faucet Qty |
1 & 2 faucets per column |
| Capacity |
23.7 cu. ft. |
| Refrigeration Type |
Self-contained refrigeration |
| Draft Towers |
(2) 3" diameter polished stainless steel draft towers (3 faucets each) |
| Doors |
(2) solid hinged doors with locks |
| Drip Tray |
Drip tray with removable grill |
| Temperature Control |
Digital thermostat |
| Glass Rinser |
Integral glass rinser |
| Refrigerant |
R134a |
| Refrigeration |
Automatic condensate evaporator |
| Electrical |
115v / 60Hz / 1-phase, 6.5 amps, NEMA 5-15P |
| Additional Notes |
NSF-approved faucets (faucet knobs not included), tapping equipment sold separately |
What Our Experts Think
-
Generous Capacity
Offers 23.7 cu. ft. of storage, accommodating various keg sizes for efficient beverage service.
-
Robust Construction
Features a stainless steel top and interior with a black vinyl over steel exterior, ensuring durability and a sleek appearance.
-
Convenient Features
Includes an integral glass rinser and a drip tray with a removable grill for easy cleaning.
-
Efficient Cooling System
Equipped with a self-contained refrigeration system powered by a 1/3 HP compressor using R134a refrigerant, promoting environmentally friendly operation.
-
User-Friendly Design
Comes with a digital thermostat for precise temperature control and an automatic condensate evaporator to enhance efficiency.
Q&A
Q: What is the Micro Matic MDD58S-E?
A: A stainless steel commercial back bar cooler designed for storing and dispensing draft beverages with style and durability.
Q: What is its keg capacity?
A: Accommodates up to two 1/2-barrel kegs or various smaller keg combinations.
Q: Is it tower-ready?
A: Yes, it comes pre-drilled for tap tower installation, allowing flexible draft configurations.
Q: Who is it best for?
A: Ideal for upscale bars, restaurants, or any venue seeking a sleek, professional back bar setup.
Maintenance Tips
To ensure optimal performance and longevity of your Micro Matic MDD58S-E, adhere to the following maintenance practices:
-
Condenser Coil Cleaning: Clean the condenser coils every six months to prevent compressor malfunction. Disconnect power, access the condensing unit, and vacuum thoroughly.
-
Cabinet Cleaning: Use lukewarm water and mild detergent to clean both interior and exterior surfaces. Avoid abrasive materials to prevent scratches.
-
Door Seal Inspection: Regularly check door gaskets for wear or damage. Replace if seals are loose or cracked to maintain energy efficiency.
-
Ventilation Maintenance: Ensure vents are unobstructed to allow proper airflow. Avoid placing items that block ventilation paths.
-
Temperature Monitoring: Maintain internal temperatures between 34°F and 38°F. Use the digital thermostat to monitor and adjust settings as needed.
-
Defrosting: If ice buildup occurs, defrost the unit to maintain efficiency.
-
Electrical Safety: Avoid using extension cords. If necessary, use a grounded 16 AWG or heavier cord, not exceeding 20 feet in length.
