SoundQubed HDS3.2 12 Series Subwoofer - HDS3.212

SoundQubed HDS3.2 12 Series Subwoofer - HDS3.212

The Heavy Duty Street 3.2 Series 1200W Subwoofer improves on its predecessor in terms of build, sound quality, heat dispersion, and frequency response. The 10, 12, or 15-inch models are available with dual 2 or 4-ohm voice coil.

The HDS3.2 series is a perfect option for elevating your daily-driver car audio system build to the next level. First, choose a sealed, ported, or band-pass enclosure. Once you decide on an enclosure option, pair your sub(s) with the appropriate S Series monoblock amp. From there, enjoy easy wiring in series or parallel thanks to the 10 AWG push terminals. Soon you’ll be on your way to a dramatically enhanced listening experience.

As with any SoundQubed subwoofer, proper break-in is key to enjoying long life from your HDS3.2. Make sure you follow the steps to loosen up the suspension before pushing these subs to the limit.

The HDS3.2 1200W Subwoofer

The dual-magnet motor features a bumped T-yoke for greater travel and better heat resistance. Additionally, the vented, electroplated back plate gives heat a way out and decreases turbulence in the coil gap. The HDS3.2 series uses a 3-inch diameter, four-layer, copper dual voice coil with a conical back plate for long-distance travel.

The HDS3.2 series feature cast aluminum frames. This upgrade provides better heat sinking and increased excursion over stamped-steel baskets. A softer three-piece spider system achieves enhanced performance and lower tuning. As a result, the HDS3.2 has an F(s) of 28.26 Hz compared to 35 Hz for the HDS3.1.

An Extended Range of Motion (EROM) surround profile keeps your cone diameter as large as possible while allowing for long, controlled excursion. The EROM profile gives you more cone area, greater stiffness, and lower mass for more accurate coil signal response. The HDS3.2 has a non-pressed, fiber added cone for maximum rigidity and long life.

Specifications 

What Our Experts Think  

• 1200W RMS Power Handling: Delivers consistent, high-output performance for demanding audio systems.

• 3-Inch, Four-Layer Copper Voice Coil: Ensures efficient heat dissipation and minimal power compression.

• Cast Aluminum Frame: Provides superior heat sinking and increased excursion over stamped-steel baskets.

• Dual 2 & 4 Ohm Configurations: Offers flexibility for various amplifier setups.

• 10 AWG Push Terminals: Facilitates easy and secure wiring connections.

• EROM Surround Profile: Maximizes cone area for greater stiffness and lower mass, enhancing bass accuracy.

• Vented Back Plate: Improves cooling and reduces coil gap turbulence.

• Durable Non-Pressed Cone: Incorporates fiber for increased rigidity and longevity.

Q&A 

Q: What is the SoundQubed HDS3.2 12 Series Subwoofer?
A: A high-performance 12-inch subwoofer designed for deep bass and high output in car audio systems.

Q: How much power can it handle?
A: It can handle up to 1000W RMS, delivering powerful, low-end sound with precision and clarity.

Q: Is it a good fit for my system?
A: Yes, it's ideal for both daily driving and competition builds, delivering exceptional bass in sealed or ported enclosures.

Q: What makes the HDS3.2 special?
A: Features a dual voice coil design, reinforced suspension, and high-excursion capabilities for intense bass response.

Q: Why choose the HDS3.2 12?
A: Designed for serious audio enthusiasts, it offers a perfect balance of power, reliability, and sound quality.

Maintenance Tips 

• Proper Break-In: Before pushing the subwoofer to its limits, follow the manufacturer's recommended break-in procedure to loosen the suspension and ensure long-term performance.  

• Enclosure Selection: Choose an appropriate enclosure type—sealed, ported, or band-pass—and size it correctly to match the subwoofer's specifications for optimal sound quality.  

• Wiring and Amplification: Use high-quality wiring and ensure proper impedance matching between the subwoofer and amplifier to prevent damage and achieve the best performance.

• Regular Inspection: Periodically check the subwoofer for any signs of wear or damage, such as tears in the cone or loose connections, and address issues promptly to maintain optimal performance.

• Avoid Overpowering: Do not exceed the subwoofer's rated power handling to prevent potential damage.

• Environmental Considerations: Keep the subwoofer dry and avoid exposure to moisture to prevent damage to the components.